Steca PLI
300, 300-L60
Description
The Steca PLI-300 is a cost-effective 300 W sine wave inverter that can be used to operate small AC loads. It has a manual on/off switch that can be used to switch the inverter off, avoiding self-consumption. The unit is particularly suitable for solar home systems in which small AC loads are manually switched on as required in addition to the DC loads. The unit is supplied with DC cables and has a European AC connection socket.
Features
Product features
- True sine wave voltage
- Optimal battery protection
- Protective insulation according to protection class II
Electronic protection functions
- Deep discharge protection
- Battery overvoltage shutdown
- Short circuit protection on the AC output side
- Overtemperature and overload protection
Displays
- 2 LEDs show operating states
Operation
- Main switch
Certificates
- Compliant with European Standards (CE)
Downloads
Technical data
| 300 | 300-L60 | |
|---|---|---|
| Characterisation of the operating performance | ||
| System voltage | 12 V | |
| Continuous power | 300 VA | |
| Power 30 min. | 300 VA | |
| Power 5 sec. | 350 VA | |
| Power asymmetric | 250 VA | |
| Max. efficiency | 85 % | |
| Own consumption standby | 0.5 W | |
| Own consumption ON | 9.0 W | |
| DC input side | ||
| Battery voltage | 10.5 V … 15 V | |
| Reconnection voltage (LVR) | 12.5 V | |
| Deep discharge protection (LVD) | 10.5 V | |
| AC output side | ||
| Output voltage | 230 V AC ±10 % | 115 V AC ±10 % |
| Output frequency | 50 Hz | 60 Hz |
| Safety | ||
| Protection class | II (double insulated) | |
| Electrical protection | no reverse polarity protection for the battery, reverse polarity AC, over voltage, over current, over temperature | |
| Operating conditions | ||
| Ambient temperature | -20 °C … +50 °C | |
| Fitting and construction | ||
| AC output side connection | European plug | |
| Cable cross-section battery | 4 mm² (AWG 12) | |
| Degree of protection | IP 20 | |
| Dimensions (X x Y x Z) | 245 x 117 x 62 mm | |
| Weight | 1,2 kg | |