Steca TR 0603mc+
Description
The Steca TR 0603mc+ solar thermal controller is the clear next step in the development of its very successful predecessor, the TR 0603mc. In particular, the Ecodesign Directive (ErP) of the European Union has now been taken into account in order to be able to control solar thermal pumps with an EEI (energy efficiency index) of 0.23. These energy-efficient and high-efficiency pumps (HE pumps) are controlled using a special PWM control signal.
The modular controller concept is a special highlight. 40 pre-programmed equipment systems and numerous additional functions facilitate universal use of the controller right from the start. Depending on the individual requirements, the controller can then be expanded at any time with additional extension and heating circuit modules. The large graphic display shows animated control loops to visualise the operating states of the respective system. The Steca TR 0603mc+ has six inputs for temperature or pulse detection as well as an additional Grundfos Direct Sensors™ input for combined temperature and flow measurement. Three partially speed-controlled outputs are used to control high-efficiency pumps, conventional AC glandless pumps and switching valves.
Features
Product features
- Flexible and expandable
- Master-slave concept
- Compact, multipart designer casing
- Electronic speed control
- High level of operational safety through fault diagnosis
- Hours-of-operation logger
- Software update possible
- Storage tank target temperature loading
- Seasonal systems (loading of pool / storage tank according to the time of the year)
- Daily pump start
- Modular extensions are possible with heating circuit controllers and expansion modules
- Screw terminals allow universal and rapid installation
- Integrated Steca TPC 1 bus
Displays
- Multifunction graphical LC display with backlighting
- Animated representation of the systems and operating states
Operation
- Multilingual menu navigation
- Side switch for manual, auto, off
Functions
- Data logger on SD card
- Heat quantity (Grundfos Direct Sensors™, pulse generator, determination)
- Heating return increase
- Reduction of stagnation phases
- Holiday (storage tank recooling)
- Circulation (controlled by temperature / time / pulse)
- Back-up heating
- Solid fuel boiler
- Storage tank quick charge
- Bypass
- Thermostat
- Differential thermostat
- Timer
- Interval / tube collector
- Anti-freeze
- Anti-legionella cyclical storage tank heating
- Display storage tank top
- Two loading zones
Downloads
Technical data
TR 0603mc+ | |
---|---|
System voltage | 230 V AC (± 15 %), 50 Hz |
System voltage optional | 115 V AC (± 15 %), 60 Hz |
Standby | 1.57 W |
Temperature control class | I |
Energy efficiency | 1 % |
Number of inputs | 6 |
Inputs | 5 x temperature (Pt1000), 1 x temperature (Pt1000) or pulse |
Additional inputs | 1 x Grundfos Direct Sensors™ (temperature / flow rate) |
Number of outputs | 3 |
Outputs | 2 x triac for speed control (R1, R2), max. 250 W (230 V) or PWM control signal for pump speed (PWM R1, PWM R2); 1 x switch output relay (R3), max. 800 W (230 V) or R3 voltage free |
Hydraulic schemes | 40 |
Ambient temperature | 0 °C … +45 °C |
Interfaces | SD card, RS-232, RS-485 (Steca TPC 1 bus) |
Data logging | SD card |
Degree of protection | IP 20 / DIN 40050 |
Dimensions (X x Y x Z) | 170 x 170 x 46 mm [0.00 x 0.00 x 0.00 inch] |
Weight | 450 g [0.00 oz] |